Rated 5 Stars by Salt Lake City Drivers

Salt Lake City's Ceramic Coating That Actually Lasts

Mains Detailing applies professional-grade ceramic coating across Salt Lake City, West Jordan, and surrounding areas. Fill out the form and get a response within the hour.

Get a Free Quote Now

Or call now: +18018654104

Why Salt Lake City Cars Need Ceramic Coating

Utah's climate is rough on paint. Intense UV exposure in summer bakes oxidation into unprotected clear coat. Winter brings road salt, sand, and ice melt that eat away at your finish every single day. A ceramic coating puts a chemically bonded layer between your paint and all of that.

Resale value is real money. A car with protected, glossy paint sells faster and for more than one with faded, swirl-marked clear coat. Ceramic coating is one of the few things you do to a vehicle that you actually get back when it's time to sell.

You also stop spending weekends washing a car that looks worse every time. Ceramic coating makes water bead off, dirt release easier, and your paint look like it just left the lot — without constant effort to maintain it.

Get a Free Quote Now

What a Proper Ceramic Coating Looks Like

Before-and-after examples of the standard we work to on every job.

Before Ceramic Coating BEFORE
After Ceramic Coating AFTER

Ceramic Coating Packages

Choose the level of protection that's right for your vehicle.

Essential Protection

  • ✓ Full exterior wash and decontamination
  • ✓ Iron fallout and tar removal
  • ✓ Single-layer ceramic coating applied to all painted surfaces
  • ✓ Hydrophobic top coat for water beading
  • ✓ Basic paint surface prep and wipe-down
  • ✓ Post-application cure check
Get a Free Quote
Most Popular

Pro Shield

  • ✓ Full exterior wash and clay bar decontamination
  • ✓ Iron fallout, tar, and mineral deposit removal
  • ✓ Single-stage paint enhancement polish to remove light swirls
  • ✓ Multi-layer ceramic coating for increased gloss and durability
  • ✓ Ceramic coating applied to glass surfaces
  • ✓ Wheel faces coated for brake dust resistance
  • ✓ Detailed cure and inspection process
Get a Free Quote

Elite Armor

  • ✓ Full exterior wash, clay bar, and deep chemical decontamination
  • ✓ Multi-stage paint correction to remove swirls, scratches, and oxidation
  • ✓ Maximum-grade multi-layer ceramic coating on all painted panels
  • ✓ Ceramic coating on glass, wheels, plastic trim, and door jambs
  • ✓ Engine bay surface protection treatment
  • ✓ Full post-application inspection with UV light verification
  • ✓ Documented coating certificate with coverage details
Get a Free Quote

The Ceramic Coating Process

1

Free Quote and Consultation

Fill out the quote form and Abel will review your vehicle details and get back to you within the hour. You will get a clear breakdown of which tier fits your car's condition and your goals — no guesswork.

Under 60 seconds to submit
2

Full Exterior Wash and Decontamination

Every ceramic coating job starts with a thorough two-bucket wash followed by chemical decontamination. This removes iron particles, tar deposits, and road grime that bond to the paint and would otherwise be sealed in under the coating.

45 to 90 minutes
3

Clay Bar Treatment

A clay bar is worked across every painted panel to pull out embedded contaminants the wash cannot remove. This step makes the surface smooth to the touch and gives the ceramic coating a clean, bare substrate to bond to.

30 to 60 minutes
4

Paint Correction (Tier Dependent)

For Pro Shield and Elite Armor tiers, a polishing machine is used to remove swirl marks, light scratches, and oxidation before any coating goes on. There is no point sealing in defects under a coating that will make them more visible.

2 to 6 hours depending on paint condition
5

Ceramic Coating Application

The ceramic coating is applied panel by panel using a suede applicator block. Each panel is leveled off before the coating begins to flash. This step requires a controlled environment and precise timing to ensure even bonding across the entire surface.

1 to 3 hours depending on tier and vehicle size
6

Cure Inspection and Handover

Once applied, the coating is inspected under high-intensity lighting to confirm even coverage and catch any high spots before they harden. Abel walks you through the initial 24-hour care instructions so the coating cures correctly and holds for years.

20 to 30 minutes
Get a Free Quote Now

Ceramic Coating FAQ

Mains Detailing offers three tiers of ceramic coating coverage. Pricing depends on your vehicle's size, current paint condition, and the level of protection you choose. Fill out the quote form and Abel will give you an exact number based on your specific vehicle — no guessing and no surprises.
A full ceramic coating appointment at Mains Detailing typically takes between 4 and 10 hours depending on the tier and the condition of your paint. Vehicles that need paint correction before coating take longer. Plan for a full day and you will not be caught off guard.
A professionally applied ceramic coating that is properly maintained will last anywhere from 2 to 5 years depending on the product and tier used. The Elite Armor tier uses the highest-grade formulation available and is built for maximum durability. Regular maintenance washes extend the life significantly.
Avoid automatic car washes with abrasive brushes. Hand wash or use a touchless wash every two to four weeks. You do not need special products for everyday washing, but using a ceramic-safe soap helps preserve the hydrophobic properties longer. Abel will walk you through everything at handover.
Warranty coverage depends on the tier selected and the coating product used. Abel will provide specific warranty information as part of your quote. To keep any warranty valid, following the recommended maintenance schedule is required.
Yes, for durability and protection. Wax lasts weeks. A sealant lasts a few months. A ceramic coating chemically bonds to the clear coat and lasts years. It is also significantly harder, meaning better resistance to light scratches, UV rays, road grime, and chemical contaminants. Wax and sealant sit on top of the paint. Ceramic coating becomes part of it.
It depends on your paint's current condition. Ceramic coating magnifies what is already there. If your paint has swirl marks, scratches, or oxidation, those defects will be more visible under the glossy coating than without it. Abel inspects the paint before every job and will tell you honestly whether correction is needed.
Yes. Mains Detailing serves Salt Lake City, West Valley City, West Jordan, South Jordan, Bluffdale, Herriman, Riverton, and Draper. Fill out the quote form with your location and Abel will confirm availability for your area.

Protect Your Paint Before Utah Winter Hits

Mains Detailing serves Salt Lake City and the surrounding area — get your free quote now and hear back within the hour.

Or call now: +18018654104